Unmatched toughness, maximum coverage.
Unmatched toughness, maximum coverage.

Unmatched toughness, maximum coverage.

Couple cooking at the open rear of a Troop Carrier under the 270 XT Awning Mk2, in gum-tree bushland

270 XT Awning Mk2

Left Hand Side Fitment
R 25,660.00
Submit an enquiry
Skip to product information
Couple cooking at the open rear of a Troop Carrier under the 270 XT Awning Mk2, in gum-tree bushland
1/14

270 XT Awning Mk2

R 25,660.00
Taxes included. Shipping calculated at checkout.

Freestanding 270° 4WD Awning | 8m² | Setup in 30 Seconds


One pivot. One movement. 30 seconds. The 270 XT Awning Mk2 swings out 8m² of freestanding shade: no poles, no fuss, one person. Pull up at the beach, get the awning out, get the line wet.


The single-pivot design is what makes it quick, and what makes it an easy fit. At 27.8kg with a 1.1m minimum bracket spacing, it suits dual cabs and shorter racks that can't take larger awnings. B-Tech® Alloy frame with fully gusseted main arms and a honeycomb-section rear arm, a stainless steel heavy-duty headstock retaining stainless steel hinge pin shafts, and 315gsm single-seam acrylic-treated polyester ripstop canvas.


Rated to 50km/h freestanding and over 90km/h when poled, guyed and pegged. Left or right hand fitment.


2-year conditional warranty.

Read more
270 XT Awning Option

View store information

270 XT Awning Mk2

Left Hand Side Fitment

Key specifications

Coverage8m2
Weight27.8Kg
Minimum mounting distance1.1m
Hinge points1
Description

270 XT Mk2: freestanding 270° awning that fits short racks and sets up in 30 seconds

The 270 XT Mk2 wraps 8m² of shade around the side and rear of your vehicle with no poles. It runs a single pivot, so opening it is one continuous movement rather than a sequence: unzip the bag, swing the arm out, then secure the tension strap on the outer arm to the vehicle to tension the canvas. You're in the shade in under 30 seconds. A single pivot also means fewer moving parts and less to line up in the dark at the end of a long day.

Which of our awnings suits you?

The 270 XT Mk2 needs only 1.1m between mounting points, so it fits short double cab racks, canopy racks and load bars that can't accommodate the 1.8m distance between the front and rear brackets that our larger awnings need. At 27.8kg it's 5.7kg lighter than the 270 XT MAX, making it the lightest awning in our 270° range.

  • 270 XT Mk2: 8m² round the side and rear, 1.1m minimum rack, lightest of our 270s.
  • 270 XT MAX Mk2: 12.2m², more front and side coverage than the 270 XT Mk2 for families and bigger groups; needs 1.8m between brackets, 33.5kg.
  • 180 XT MAX: 8.53m² straight down the side, keeps barn doors and tailgates clear; needs 1.8m.

For solo or duo touring, or on a shorter rack, the 270 XT Mk2 is the better buy, not a compromise. If you want more shade along the front and side for a family or bigger group, and have 1.8m of rack length, step up to the MAX.

Freestanding, rated to 50km/h

There are no poles under it: nothing to sink into wet sand, trip over at night or rattle loose on corrugations. The B-Tech® Alloy main arms are fully gusseted for maximum strength: gusseting adds torsional stiffness at the joints, so the frame holds its shape and the canvas stays tensioned with nothing on the ground. The rear arm has a honeycomb cross-section along its full length for torsional strength without extra weight.

It's rated to 50km/h freestanding and to over 90km/h when poled, guyed and pegged down securely. Guy ropes and pegs are included: in windy conditions, use them on the non-trussed arm to prevent upward movement.

Packing away is the same movement in reverse, into an oversized 450gsm PVC bag that takes the canvas back easily even when it's wet or dusty.

Stainless steel headstock: where the strength starts

The whole awning pivots on a stainless steel heavy-duty headstock that retains the stainless steel hinge pin shafts for the arms. It carries the full load of the open awning into the vehicle mount, so this is where an awning's strength is won or lost. Stainless steel resists corrosion from salt spray, keeps the arms swinging freely through dust and corrugations, and holds its shape under load, and the rear L bracket mounts straight to it.

One seam. Fewer leaks.

Every stitch line across an awning is a place water can get in. The 270 XT Mk2 is made from 315gsm acrylic-treated polyester ripstop canvas cut from an ultra-wide roll, so the whole 270° awning has a single seam. It's tested to a waterhead of more than 1000mm (ISO 811:1981), treated for UV, mould and mildew, and has triple-stitched sleeves and reinforced attachment points at every load-bearing corner. Wet it down before its first trip so the core-spun thread swells and seals the stitch holes.

Two brackets, 1.1m, done

Two height adjustable heavy-duty stainless steel L brackets are included in the price. One must be mounted to the stainless steel headstock at the rear of the awning, and the second no less than 1.1m from the rear bracket. Add a third (not supplied) in the centre if you want extra support on a long rack, but two is all the awning needs. Packed, it's 2300mm long × 210mm high, with a frame 170mm wide, and sits inside a standard roof line without overhang.

Running a Bush Company rooftop tent? The optional Awning-to-Tent bracket mounts it straight to the tent for a low, tidy touring profile.

Add walls when the weather turns

A 50mm triple-stitched strip of genuine Velcro® loop runs the entire length of the valance around the outside edge of the awning. It's rated to hold 3kg per 50mm length, so it's ideal for securing awning walls. Using Velcro rather than a zip along the awning also means there's no zip to rub against the canvas when the awning is packed tightly away in transit. Run a single canvas wall or mesh wall as a windbreak on the exposed side, or add the 270 XT Wall Kit to close it in completely and turn 8m² of shade into a private room. The single walls have full-length YKK spiral zips on both sides, so you can zip canvas and mesh walls together to increase coverage as required.

Usage guidance

  • In windy conditions, use the supplied guy ropes and pegs on the non-trussed arm to prevent upward movement.
  • In heavy rain, run guy ropes off 1-tonne webbing straps between the arms to shed water and reduce the risk of pooling.
  • Lubricate the hinge pins in the headstock regularly to keep the arms moving freely, especially if you use the awning often in salty coastal conditions.
  • Don't leave it up in snow: the weight stretches the canvas.
  • Wet the canvas down thoroughly before first use.
  • See the awning installation instructions (PDF).
Specifications
  • Mount type: left or right side available
  • Fabric: 315gsm acrylic-treated polyester ripstop canvas, single seam
  • Canvas treatment: UV stabilised, mould and mildew resistant
  • Waterhead: >1000mm (tested to ISO 811:1981)
  • Wind rating: 50km/h freestanding; over 90km/h when poled/guyed and pegged down securely
  • Frame: extruded aluminium alloy (B-Tech®); fully gusseted main arms, honeycomb cross-section rear arm
  • Headstock: stainless steel heavy-duty, at the rear of the awning, retaining stainless steel hinge pin shafts for the arms
  • Pivot points: 1 (single pivot)
  • Awning bag: 450gsm PVC tonneau
  • Packed dimensions: 2300mm L × 210mm H; frame 170mm wide (packed width depends on how the canvas is packed)
  • Coverage: 8m², 270°
  • Weight: 27.8kg
  • Setup: under 30 seconds, one person
  • Wall attachment: 50mm genuine Velcro® brand loop strip along the entire valance, rated to hold 3kg per 50mm length
  • Included: guy ropes and pegs
  • Warranty: 2 years conditional

Vehicle Compatibility

If mounting to a roof rack, the rack will typically need to be at least 1.1m long.

Supplied with 2 height adjustable heavy-duty stainless steel L brackets. One L bracket must be mounted to the stainless steel headstock at the rear of the awning, and the second no less than 1.1m from the rear bracket.

Installation

Installing Your Bush Company Awning

A copy of the fitting instructions for The Bush Company awnings is available for download here.

The Bush Company or one of our dealers can assemble and install your awning, but if you choose to install the awning yourself please make sure that you have done the due diligence on your intended installation to ensure that it does not create any safety issues and ensure that you follow standard safety precautions when undertaking the install.

Care & Maintenance

Using & Caring For Your Awning

Before Use:

We recommend that new awnings are thoroughly wet down before first use. This lets the core-spun stitching thread swell and seal the stitch holes, so your awning performs well in wet weather.

Deploying & Packing Away:

  • When unzipping the awning, make sure the zippers are right to the top of the bag at each end and that the bottom corners of the bag are not caught on the awning frame.
  • When deploying your awning if the canvas seems excessively tight, STOP and check that the canvas is not caught at the headstock and that it has not slid too far one way in the sail-track on the awning frame.
  • When packing the awning away, ensure that the canvas is not pinched between the awning arms, especially close to the headstock.

Cleaning Canvas & PVC Bag:

  • To clean canvas use a soft brush and cold water.
  • Do not expose to petrol, oils or harsh chemicals.
  • The PVC bag can be cleaned with standard car wash cleaning solution.

Cleaning mould:

Your awning canvas is pre-treated with mould and mildew resistance, but if mould/mildew does occur please follow these steps:

  • Allow mould to dry.
  • Remove surface mould with stiff bristle brush.
  • Vacuum the area.
  • Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water).

Regular Maintenance & Checks:

Like any accessory used in extreme conditions regular maintenance is required to ensure the longevity of your awning, including:

  • Inspect the stainless steel headstocks to identify any bolts that may need re-tightening.
  • Lubricate the hinge pins in the headstocks regularly to keep the arms moving freely, especially if you use the awning often in salty coastal conditions.
  • Ensure that the awning canvas is correctly located in the sail-track on the backing frame to eliminate excessive tension on the canvas.
  • Inspect the attachment of the canvas to the ends of the awning arms.
  • Inspect canvas to identify any wear marks caused by incorrect packing of the canvas.
Delivery

Dispatched every Wednesday

Orders are packed at our Rosslyn warehouse and collected by our couriers every Wednesday. Orders placed by Monday 12:00 go out that Wednesday; later orders go out the following Wednesday.

Delivered to your door

Rooftop tents, awnings and other bulky items travel door to door with our freight partner. Accessories and smaller items go with our courier partners, by Economy or Express, or to a Pargo point or Bob Box locker where available. The exact cost is shown at checkout.

Usual delivery times after dispatch

  • Tents, awnings and freight: 1 to 3 business days in Gauteng, 2 to 5 to other main centres, 4 to 7 to regional areas
  • Smaller items, Economy: 2 to 5 business days
  • Smaller items, Express: 1 to 3 business days

Insured in transit

Every delivery is insured while it's with our couriers, at no extra charge to you. Please check your order on arrival and tell us about any damage within 48 hours.

Or collect for free

Collect from our Rosslyn warehouse on a Wednesday, 8am to 5pm. Choose "Pickup" at checkout.

Namibia, Botswana, Zimbabwe, Lesotho

Order online and choose "Pickup" at checkout, then select our Rosslyn warehouse (if it isn't listed, search for postal code 0200). Your own courier or clearing agent collects on a Wednesday. Prices include 15% South African VAT.

Read our full shipping policy

Stacked with features

Set up in 30 seconds

Set up in 30 seconds

Set up in under 30 seconds. Our stainless steel heavy-duty headstocks retain the stainless steel hinge pin shafts for the arms, so they swing out smoothly and you can kick back faster.

270° freestanding coverage

270° freestanding coverage

8m² of freestanding 270° coverage wrapping the side and rear of your vehicle, perfect for spreading out or sharing the space with mates. The single pivot arm makes setup fast and simple.

One seam to keep you dry

One seam to keep you dry

Our single-seam solution means everyone stays dry and comfortable, with less chance of leaks. Made in South Africa, our unique design method maximises canvas width and minimises seams, significantly reducing the potential for leakage.

Built tough

Built tough

Engineered for the extreme: our B-Tech® Alloy frame and extrusions, fully gusseted main arms and stainless steel heavy-duty headstocks are built tough, providing ultimate strength and durability. Invest once, and own an awning built to last.

Withstand wild weather

Withstand wild weather

Built to take on extreme conditions, our awning stands tall on its own, even when the weather turns wild. For those extra windy days, we’ll keep you grounded with the included guy ropes and pegs. Trust us: your car’s more likely to lift off than this beast.

Next level accessories

Next level accessories

Create your own space with privacy and protection from the elements thanks to the freestanding awning wall kit accessories. Detachable walls are easy to use and turn your outdoor space into a cosy living room with a stunning view.

270 XT Awning Mk2 features
270 XT Awning Mk2 features

Not sure which one is right for you?

Compare Our Freestanding Awnings

180 XT MAX Awning 180 XT MAX Awning View details 270 XT Awning Mk2 270 XT Awning Mk2 View details 270 XT MAX Awning Mk2 270 XT MAX Awning Mk2 View details
PriceR 20,615.00R 25,660.00R 31,265.00
FitmentLeft- or right-hand sideLeft- or right-hand sideLeft- or right-hand side
Weight26.5kg27.8kg33.5kg
Awning coverage8.53m²8m²12.2m²
Minimum mounting distance1.8m1.1m1.8m
Pivot points212

FAQs

What are the dimensions?

When packed away, the awning is approximately 2300mm long x 210mm high, with a frame 170mm wide. When open the awning is 8m².

See the dimension diagrams:

Is the 270 XT Awning Mk2 freestanding?

Yes. Once mounted to your vehicle, no poles or ground supports are needed. It's rated to 50km/h freestanding and over 90km/h when poled, guyed and pegged down securely. Guy ropes and pegs are included; in windy conditions, use them on the non-trussed arm to prevent upward movement.

How much shade does it give?

8m² (86 sq ft) of 270° wraparound coverage across the side and rear of your vehicle.

How heavy is the awning?

27.8kg (61.3 lb), before brackets. It's the lightest 270-degree awning in The Bush Company range.

How long does it take to set up?

Under 30 seconds, one person. The single pivot means deployment is one continuous movement: swing the arm out, then secure the tension strap on the outer arm to the vehicle to tension the canvas.

Can I add walls?

Yes. A 50mm strip of genuine Velcro® brand loop runs the entire length of the valance around the outside edge of the awning, rated to hold 3kg per 50mm, ready for the wall kits. Run one wall as a windbreak or enclose the space completely.

What's the difference between the 270 XT Mk2 and the 270 XT MAX Mk2?

The XT has a single pivot, 8m² (86 sq ft) of coverage, weighs 27.8kg (61.3 lb), sets up in under 30 seconds and fits racks from 1.1m. The MAX has two pivot points and a forward-folding front section for 12.2m² (131 sq ft) and more front and side coverage, weighs 33.5kg (73.9 lb) and needs 1.8m between the headstock brackets. Choose the XT for shorter racks and a lighter load; the MAX for maximum coverage around the vehicle.

Does this awning need poles?

No. Poles are only recommended when running the optional awning wall kits, and those poles come with the wall kit.

Left hand or right hand fitment: which do I need?

Choose the side you want the awning to deploy from. Most tourers fit it to the side their camp kitchen or canopy door opens onto. On a right hand drive vehicle (as in South Africa), the left hand awning mounts to the passenger side.

What's the warranty?

2 years conditional.

Can I install it myself?

Yes. At 27.8kg (61.3 lb) you'll want a second set of hands for lifting and bolting. Fitting instructions are on our Guides & Instructions page, or any Bush Company dealer can fit it for you.

Are brackets included?

Yes. Two height-adjustable heavy-duty stainless steel L brackets come with the awning.

What roof rack do I need?

Any rack or load bars giving at least 1.1m between mounting points. One L bracket must be mounted to the stainless steel headstock at the rear of the awning, and the second no less than 1.1m from the rear bracket.

How do I install it? (video)

A copy of the fitting instructions for The Bush Company awnings is available on our Guides & Instructions page.

The Bush Company or one of our dealers can install your awning. If you choose to install it yourself, please make sure you have done your due diligence so that it does not create any safety issues, and follow standard safety precautions while you work.

You may find these videos useful:

Didn’t find your answer?

Don’t hesitate to contact us

Recommended accessories

You may also like