270 XT MAX Awning Mk2
Pickup currently not available
Key specifications
| Coverage | 12.2m2 |
|---|---|
| Weight | 33.5Kg |
| Minimum mounting distance | 1.8m |
| Hinge points | 2 |
Description
270 XT MAX Mk2: our biggest freestanding 270° awning, 12.2m²
12.2m² of shade across a 6067 × 3100mm footprint, wrapping your vehicle from the front door right around the rear, with no poles touching the ground. Roll into camp, swing the arms into position and secure the tension straps on the outer arms to the vehicle to tension the canvas: in under 30 seconds the whole camp is covered.
What makes the MAX different
Both our 270s are freestanding; the difference is in the pivots. The 270 XT Mk2 runs a single pivot: fast, simple, 8m², and ideal for solo or duo touring on shorter racks. The 270 XT MAX Mk2 runs two pivot points and a forward-folding front section. That second pivot pushes coverage out to 12.2m², with more shade along the front and side of the vehicle than the 270 XT Mk2. And unlike the 180 XT MAX, it wraps round the rear as well.
The MAX weighs 33.5kg (the 270 XT Mk2 is 27.8kg) and needs a 1.8m minimum mounting spread (the 270 XT Mk2 needs 1.1m). If you run a wagon, van or canopied bakkie and want the whole camp covered, the MAX is the one. If you're working with a shorter rack, the 270 XT Mk2 gives you the same freestanding 270° design in a more compact package.
Freestanding, rated to 50km/h
The B-Tech® Alloy main arms are fully gusseted for maximum strength and carry the load themselves, while the front and rear arms have a honeycomb cross-section along their full length for torsional strength without extra weight. The canvas stays tensioned with nothing on the ground: nothing to trip over at night, sink into soft sand or rattle loose on corrugations. It's rated to 50km/h freestanding and to over 90km/h when poled, guyed and pegged down securely. Guy ropes and pegs are included.
Pack-down is the same movement in reverse, and the oversized 450gsm PVC bag means you're not wrestling wet canvas back into a tight sleeve while the weather closes in.
One seam across 12.2m²
The awning is made from 315gsm acrylic-treated polyester ripstop canvas cut from an ultra-wide roll, so all 12.2m² is built with a single seam. Fewer seams, fewer leak paths. It's tested to a waterhead of more than 1000mm (ISO 811:1981), treated for UV, mould and mildew, with triple-stitched sleeves and reinforced attachment points at every load-bearing corner. Wet it down before its first trip so the core-spun thread swells and seals the stitch holes.
Stainless steel headstocks and B-Tech® Alloy frame
Each end of the awning is built around a stainless steel heavy-duty headstock that retains the stainless steel hinge pin shafts for the arms. The headstocks carry the full load of 12.2m² of open awning into the vehicle mounts, so this is where an awning's strength is won or lost. Stainless steel resists the salt that eats plated hardware on beach runs, keeps the arms swinging freely through dust and corrugations, and holds its shape under load.
The frame is The Bush Company's own B-Tech® Alloy extrusion with a powder-coated finish. Extruded alloy resists the torsional flex that cracks welded frames on corrugations. Australian owned and designed, and made in South Africa for the toughest roads.
Mounting to your rig
It ships with three height adjustable heavy-duty stainless steel L brackets. An L bracket must be mounted to the stainless steel headstock at each end of the awning. The third bracket is only needed when mounting to load bars or a roof rack, not a rooftop tent, and normally goes towards the centre of the awning. You need at least 1.8m between the two headstock brackets. Most full-length platform racks, load bars and canopy racks clear this; some rack systems need extra hardware. Packed, it's 2300mm long × 230mm high, with a frame 170mm wide, so it sits low, inside a standard roof line.
It suits double cab bakkies, Land Cruiser 79 Series and wagon platforms, van conversions, canopied bakkies and camper trailers: anywhere with 1.8m of mounting spread. Running a Bush Company rooftop tent? The optional Awning-to-Tent brackets mount the awning directly to the tent for a tidy, low-profile setup.
A quick check before you order
As with any roof-mounted gear, it's worth adding up the awning (33.5kg), brackets, rack and anything else you carry up top, and confirming the total sits within your vehicle's dynamic roof load rating. If you'd like a lighter option, the 270 XT Mk2 (27.8kg) or the 180 XT MAX (26.5kg) use the same canvas and the same B-Tech® Alloy frame.
Build it into a room
A 50mm strip of genuine Velcro® brand loop runs the entire length of the valance around the outside edge of the awning. It's rated to hold 3kg per 50mm length, so it's ideal for securing awning walls. Using Velcro rather than a zip along the awning also means there's no zip to rub against the canvas when the awning is packed tightly away in transit. Run one canvas wall or mesh wall as a windbreak on the exposed side, or add the 270 XT MAX Wall Kit (five walls plus a front arm wall) to turn 12.2m² of shade into a fully enclosed room. The single walls have full-length YKK spiral zips on both sides, so you can zip canvas and mesh walls together to increase coverage as required.
Who it's for
Long-range tourers, families and overland crews running wagons, vans or canopied bakkies who want maximum shade around the whole rig.
Usage guidance
- In windy conditions, use the supplied guy ropes and pegs on the non-trussed arms to prevent upward movement.
- In heavy rain, run guy ropes off 1-tonne webbing straps between the arms to shed water and reduce the risk of pooling.
- Lubricate the hinge pins in the headstocks regularly to keep the arms moving freely, especially if you use the awning often in salty coastal conditions.
- Don't leave it up in snow: the weight stretches the canvas.
- Wet the canvas down thoroughly before first use.
- See the Care & Maintenance tab for cleaning and storage.
Specifications
Installation
Care & Maintenance
Delivery


Stacked with features
Set up in 30 seconds
Set up in under 30 seconds, with no poles to deal with. Our stainless steel heavy-duty headstocks retain the stainless steel hinge pin shafts for the arms, so they swing out smoothly and you can kick back faster.
270° freestanding coverage
12.2m² of freestanding 270° coverage, the biggest in our range, perfect for spreading out or sharing the space with mates. The forward-folding front section gives more shade along the front and side of your vehicle.
One seam to keep you dry
Our single-seam solution means everyone stays dry and comfortable, with less chance of leaks. Made in South Africa, our unique design method maximises canvas width and minimises seams, significantly reducing the potential for leakage.
Built tough
Engineered for the extreme: our B-Tech® Alloy frame and extrusions, fully gusseted main arms and stainless steel heavy-duty headstocks are built tough, providing ultimate strength and durability. Invest once, and own an awning built to last.
Withstand wild weather
Built to take on extreme conditions, our awning stands tall on its own, even when the weather turns wild. For those extra windy days, we’ll keep you grounded with the included guy ropes and pegs. Trust us: your car’s more likely to lift off than this beast.
Next level accessories
Create your own space with privacy and protection from the elements thanks to the freestanding awning wall kit accessories. Detachable walls are easy to use and turn your outdoor space into a cosy living room with a stunning view.


270 XT MAX Awning Mk2 videos
Bruder EXP-4 with TX27 MAX Rooftop Tent
Bruder EXP-4 with TX27 MAX Rooftop Tent
Not sure which one is right for you?
Compare Our Freestanding Awnings
180 XT MAX Awning
View details
|
270 XT Awning Mk2
View details
|
270 XT MAX Awning Mk2
View details
| |
| Price | R 20,615.00 | R 25,660.00 | R 31,265.00 |
|---|---|---|---|
| Fitment | Left- or right-hand side | Left- or right-hand side | Left- or right-hand side |
| Weight | 26.5kg | 27.8kg | 33.5kg |
| Awning coverage | 8.53m² | 8m² | 12.2m² |
| Minimum mounting distance | 1.8m | 1.1m | 1.8m |
| Pivot points | 2 | 1 | 2 |
FAQs
What are the dimensions?
2300mm long x 230mm high, with a frame 170mm wide, so it sits inside a standard roof line without overhang.
When open the awning is 12.2m² (131 sq ft), across a 6067mm x 3100mm footprint (19'11" x 10'2").
See the dimension diagrams:
Is the 270 XT MAX Awning Mk2 freestanding?
Yes. Once it is mounted to your vehicle, no poles or ground supports are needed to deploy it. It's rated to 50km/h freestanding and over 90km/h when poled, guyed and pegged down securely. Guy ropes and pegs are included; in windy conditions, use them on the non-trussed arms to prevent upward movement.
How much shade does it give?
12.2m² (131 sq ft), across a 6067mm x 3100mm footprint (19'11" x 10'2"), wrapping 270° around the side and rear of your vehicle.
What canvas is it made from?
315gsm acrylic-treated polyester ripstop canvas, cut from an ultra-wide roll so all 12.2m² is built with a single seam. It is treated for UV, mould and mildew and tested to a waterhead of more than 1000mm (ISO 811:1981).
How big is it packed away?
2300mm long x 230mm high, with a frame 170mm wide.
What's the difference between the 270 XT MAX Mk2 and the 270 XT Mk2?
The MAX has two pivot points and a forward-folding front section, giving 12.2m² (131 sq ft) of coverage with more shade along the front and side than the 270 XT Mk2. The 270 XT Mk2 has a single pivot, 8m² (86 sq ft) of coverage, weighs 27.8kg (61.3 lb) instead of 33.5kg (73.9 lb), and needs only 1.1m of bracket spacing instead of 1.8m.
Left hand or right hand fitment: which do I need?
Choose the side you want the awning to deploy from. Most tourers fit it to the side their camp kitchen or canopy door opens onto. On a right hand drive vehicle (as in South Africa), the left hand awning mounts to the passenger side.
What's the warranty?
2 years conditional.
Can I add walls?
Yes. A 50mm strip of genuine Velcro® brand loop runs the entire length of the valance around the outside edge of the awning, rated to hold 3kg per 50mm, ready for the wall kits, so you can run a single windbreak or fully enclose the space.
Does it need poles?
No. Poles are only recommended when you're running the optional awning wall kits, and those poles are supplied with the wall kit.
How heavy is the awning?
33.5kg (73.9 lb), before brackets. As with any roof-mounted gear, check the total against your vehicle's dynamic roof load rating.
Can I install it myself?
Yes. Because of the 33.5kg (73.9 lb) weight you'll want a second set of hands for lifting and bolting. Fitting instructions are on our Guides & Instructions page, or any Bush Company dealer can fit it for you.
What roof racks is it compatible with?
Any rack or set of load bars giving at least 1.8m between the two headstock brackets. An L bracket must be mounted to the stainless steel headstock at each end of the awning; the third is only needed on load bars or a roof rack (not a rooftop tent) and normally goes towards the centre of the awning. Some rack systems need additional hardware.
How do I install it? (video)
A copy of the fitting instructions for The Bush Company awnings is available on our Guides & Instructions page.
The Bush Company or one of our dealers can install your awning. If you choose to install it yourself, please make sure you have done your due diligence so that it does not create any safety issues, and follow standard safety precautions while you work.
You may find these videos useful:
Didn’t find your answer?
Don’t hesitate to contact us


